Each piece is then mapped to a different attribute on the title block.For example, to map the first description line to three attributes, use this format: attrname1|attrname2|attrname3=DD1 Then, in the Description 1 value in the Drawing properties: drawing settings tab dialog box, delimit the value with “|” at the break points. The Update Title Block command splits this string of text across the three title block attributes.If you bump revisions on each page with any change, consider using the Title Block Update utility. For the utility to work either ALL sheets are bumped or they are not.As with any automation, the process must remain consistent.The drawing descriptions assigned in the Drawing Properties dialog box.Up to three drawing descriptions can be added to a drawing.Using the "Title Block Update" utility from the Project tab, you can automatically update all the title blocks in the entire project with mapped information.
Those lines are simply notes for future editors and can be removed.Drawing Settings can be pushed to each individual drawing's title block.Now that you know what can be pushed lets see it in action. Attributes, a mapping, and project description labels.The drawing description codes DD1 (or DWGDESC), DD2 and DD3 are used for the three description lines.Specifies to activate every drawing so you can update the title block lines on selected drawings in the project.If the expression is a full Auto LISP function, it must return a string value (not an integer, real, list, or nil value).